Programing the Hunter Thermostat
Setting the day and time
Press the “day/time” button to
start the setting mode.
Pressing the arrow keys up or down will
change the hour. Remember to keep selecting
the hour till the AM/PM is right.
Now press “day/time” again to
select the minutes with the arrow keys.
After the minutes have been selected
press “day/time” again and use the arrow keys to set the day of
the week.
Pressing the “day/time” button
again will save your settings and go back to normal operation.
At any time during the programing you
can return to normal operation by hitting the “hold” button.
Changing from Fahrenheit to Celsius
Press and hold the up button.
While holding the up button use a paper
clip or wire to press and release the reset button.
Release the up button once the display
turns on again.
To revert to Fahrenheit press the reset
button.
Warning:
Pressing reset at any time will lose all programs.
Changing To 24Hr. Time Format
While the time is flashing(during
programing) press “program” to switch formats.
Programing your heating or cooling schedule
The Hunter programmable thermostat allows you to set a custom schedule by programing the temperature your has is at set times of the day. You can set up to four times and temperatures for Monday threw Friday and four times and temperatures for Saturday and Sunday for both heat and cool modes.
Note: While in program mode the thermostat will return to normal mode if no buttons are pressed in a fifteen second time span.
Select heat or cool to program the corresponding system.
Press “program” to enter program mode.
Press up or down arrows to select the hour you want the temperature to be at.
Press “program” again to change to minutes.
Select the minute using the up or down arrows.
Press “program” to select the temperature for that time.
Press “program to move to the next program time and repeat all for the 2,3,4 program of the week and for all four programs for the weekend.
Finally press “program” to return to normal mode.
You have now programed your thermostat. So sit back and enjoy the savings. For an example of a program I set my as follows:
Monday-Friday
1. 12:00am 65deg
2. 06:00am 68deg
3. 07:00am 70deg
4. 10:00pm 68deg
Saturday-Sunday
1. 12:00am 65deg
2. 07:00am 68deg
3. 08:00am 70deg
4. 10:00pm 68deg
As you can see they are fairly the same put I sleep in a little longer on the weekend. When everyone is in bed I let the house cool down to 65deg but then it gradually warms up to 70deg by the time we wake up.
Auto Recovery
Now is a good time to tell you about Hunter's Auto Recovery mode that meets the Energy Star guidelines. Auto Recovery is on by default and gradually raises or lowers the temperature so your house will be at the set temperature at the time you set. This allows the heat to gradually run instead of try to raise the temperature all at once saving you money. The Hunter Thermostat will display “RECO” when Auto Recovery is in progress. The Auto Recovery switch is on the back of the thermostat.
Filter Reminder
The Hunter model 44110 has a filter reminder function that will remind you to change your filter after 400 hours of operation. To reset the counter press and hold “filter” for three seconds.